Image/Data Management
LOGIQ 7 Basic User Manual 15-23
Direction 2392206-100 Rev. 1
Patient, Report, and User-Defined Backup Protocols (continued)
4. Select the media. Select everything under Backup by
placing a check mark in front of Patient Archive, Report
Archive, and User Defined Configuration. Then press
Backup.
Figure 15-7. Backup/Restore Menu
NOTE: The detailed section of this menu decouples the user
defined configuration above. This allows you to selectively
restore what you want to restore across multiple machines.
Refer to Chapter 16 for more information.
5. Answer ‘Ok’ to the following pop-up message as many times
as the number of items you are backing up.
Figure 15-8. Back-up Confirmation Message
To Next Page
Loading...
Need help?
General
