Recording Images
15-36 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Portable Exam
To perform a portable exam,
1. Go to the worklist and get the patient(s) you will need for this
portable exam(s).
2. Ensure that images will be saved to the local hard drive.
3. Press the Power On/Off switch and select Standby.
4. Proceed to perform the exam(s). Select the patient, do the
exam. Store images. Images are held in the spooler.
5. If there are additional patients to scan, repeat steps 4 and 5.
6. When you have returned from performing the portable
exam(s), reconnect to the network.
7. Press F4. Resend all of the images in the spooler to the
printer/storage device.
8. Perform an EZBackup/Move to remove the images from the
hard drive.
To Next Page
Loading...
Need help?
General
