GE LOGIQ 7 Basic User Manual

System Presets
LOGIQ 7 Basic User Manual 16-7
Direction 2392206-100 Rev. 1
System/General Preset Menu (continued)
Table 16-4: Key Usage
Preset Parameter Description
CineRun Trackball
control
Select Frame by Frame or Loop Speed. Frame by
Frame manually steps through CINE playback by
using the Trackball. Loop Speed controls the speed
of the CINE Loop playback. Roll the Trackball to the
left to slow down playback; roll the Trackball right to
speed up playback. The Loop Speed displays in the
lower, right-hand corner of the screen.
Swap set and
program key
Select the functionality for the left Set key on the
Front Panel: Pointer, Set, or Freeze.
Program Key
Mapping
Allows you to program the left set key’s functionality
(Pointer, Set, or Freeze). You need to reboot the
system after reprogramming the Set and Select
keys.
Reverse Focus
Control
Select to reverse Focus key operation.
Reverse Depth
Control
Select to reverse Depth key operation.
Reverse Steer
Control
Select to reverse Steer key operation.
Reverse Baseline
Rotaries
Select to reverse Baseline key operation.
Trackball Field Engineer use only. Select to display the
Mouse Properties window (faster, slower, snap-to
default).
Table 16-5: Utility
Preset Parameter Description
Prompt for Save on
Cancel or Exit
If selected, the system prompts you to save data
when you select cancel or exit without saving.
Utility Font Size Select the font size you want to use to view the
Utility menus: Small, Medium, or Large.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English