Preparing the System for Use
3-28 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Transporting the System (continued)
8. Load the unit aboard the vehicle carefully and over its center
of gravity. Keep the unit still and upright.
NOTE: Do not lay the unit down on its side.
9. Ensure that the system is firmly secured while inside the
vehicle. Any movement, coupled with the weight of the
system, could cause it to break loose.
10. Secure system with straps or as directed otherwise to
prevent motion during transport.
11. Prevent vibration damage by driving cautiously. Avoid
unpaved roads, excessive speeds, and erratic stops or
starts.
To Next Page
Loading...
Need help?
General
