Configuring Connectivity
LOGIQ 7 Basic User Manual 16-93
Direction 2392206-100 Rev. 1
Setting up a Printer
For instance a video capture device, on the Utility -->
Connectivity --> Service page, in the Service Type to Add box,
and press Add. In the properties box on the upper, right-hand
side, select the type of device and in the Properties box in the
lower, left-hand side, type in a unique descriptive name for this
device.
There are two service types that pertain to printers: Standard
Print and Video Capture Device.
Standard Print. Use Standard Print for digital peripherals. These
are printers with either a USB interface or Ethernet interface
(Sony UP-D50, Sony UP-D21MD, Tally Laser Printer, for
example).
Video Capture Device. Use Video Capture Device for devices
that are triggered by a contact closure, typically analog devices
(Sony UP-D51MDU color printer, Sony UP-MDW black/white
printer, VCR Record/Pause, EXT1 and EXT2, for example).
On the Utility --> Connectivity --> Button page, select the Print
key in the upper, left-hand corner of the display. In the middle
portion of the page, under Available Input/Outputs, select the
printer you want to configure. Next, press the two right arrows
(>>) in the upper, right-hand corner of the page to move this
printer into the Printflow View.
You can also configure the Standard Print button that appears
on the New Patient Active Images screen.
To Next Page
Loading...
