GE LOGIQ 7 Basic User Manual

Probe Overview
LOGIQ 7 Online Help 17-13
Direction 2392536-100 Rev. 1
E8C Probe Handling Precautions
If the sterilization solution comes out of the E8C probe, please
follow the cautions below.
CAUTION
Sterilant Exposure to Patient (e.g., Cidex)—Contact with a
sterilant to the patient’s skin or mucous membrane may cause
an inflammation. If this happens, refer to the sterilant’s
instruction manual.
Sterilant Exposure from Probe Handle to Patient (e.g.,
Cidex)—DO NOT allow the sterilant to contact the patient.
Only immerse the probe to its specified level. Ensure that no
solution has entered the probe’s handle before scanning the
patient. If sterilant comes into contact with the patient, refer the
the sterilant’s instruction manual.
Sterilant Exposure from Probe Connector to Patient (e.g.,
Cidex)—DO NOT allow the sterilant to contact the patient.
Only immerse the probe to its specified level. Ensure that no
solution has entered the probe’s connector before scanning the
paitent. If sterilant comes into contact with the patient, refer the
the sterilant’s instruction manual.
E8C Point of Contact—Refer the the sterilant’s instruction
manual.

GE LOGIQ 7 Specifications

General

Brand	GE
Model	LOGIQ 7
Category	Medical Equipment
Language	English