HEIDENHAIN TNC 620 Programming Station User Manual

Programming Q Parameters | Additional functions
10
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
387
Keyword Function
L_SLOVENIAN Outputs text only for Slovenian conversa-
tional language
L_NORWEGIAN Outputs text only for Norwegian conversa-
tional language
L_ROMANIAN Outputs text only for Romanian conversa-
tional language
L_SLOVAK Outputs text only for Slovakian conversation-
al language
L_TURKISH Outputs text only for Turkish conversational
language
L_ALL Display text independently of the conversa-
tional language
HOUR Number of hours from the real-time clock
MIN Number of minutes from the real-time clock
SEC Number of seconds from the real-time clock
DAY Day from the real-time clock
MONTH Month as a number from the real-time clock
STR_MONTH Month as a string abbreviation from the real-
time clock
YEAR2 Two-digit year from the real-time clock
YEAR4 Four-digit year from the real-time clock
Creating a text file
To output the formatted texts and Q-parameter values, create a
text file with the control’s text editor. In this file you then define the
output format and Q parameters you want to output. Create this
file with the extension .A.
Example of a text file to define the output format:
"MEASURING LOG OF IMPELLER CENTER OF GRAVITY";
"DATE: %02d.%02d.%04d",DAY,MONTH,YEAR4;
"TIME: %02d:%02d:%02d",HOUR,MIN,SEC;
"NO. OF MEASURED VALUES: = 1";
"X1 = %9.3F", Q31;
"Y1 = %9.3F", Q32;
"Z1 = %9.3F", Q33;

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English