HEIDENHAIN TNC 620 Programming Station User Manual

MOD Functions | Ethernet interface
19
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017
759
Press the Configuration button to open the Configuration
menu:
Setting Meaning
Status Interface active: Connection status of the
selected Ethernet interface
Name: Name of the interface you are
currently configuring
Plug connection: Number of the plug
connection of this interface on the logic
unit of the control
Profile
Here you can create or select a profile in
which all settings shown in this window are
stored. HEIDENHAIN provides two standard
profiles:
DHCP-LAN: Settings for the standard
Ethernet interface; should work in a
standard company network
MachineNet: Settings for the second,
optional Ethernet interface; for
configuration of the machine network
Press the corresponding buttons to save, load
and delete profiles
IP address Automatically procure IP address option:
The control is to procure the IP address
from the DHCP server
Option Manually set IP address: Manually
define the IP address and subnet mask.
Input: Four numerical values separated
by periods, e.g.160.1.180.20 and
255.255.0.0
Domain Name
Server (DNS)
Option Automatically procure DNS: The
control is to automatically procure the IP
address of the domain name server
Option Manually configure the DNS:
Manually enter the IP addresses of the
servers and the domain name
Default
gateway
Automatically procure default gateway
option: The control is to automatically
procure the default gateway
Option Manually configure the default
gateway: Manually enter the IP addresses
of the default gateway
Apply the changes with the OK button, or discard them with the
Cancel button

HEIDENHAIN TNC 620 Programming Station Specifications

General

Brand	HEIDENHAIN
Model	TNC 620 Programming Station
Category	Control Systems
Language	English