Hitachi WJ C1 Series User Manual

Chapter 9 Inverter Functions
9-0-4
9.14 Performing Positioning Operation (Simple Position Control Function) .................................. 9-14-1
9.14.1 Overview of Simple Position Control Function and Basic Settings ................................. 9-14-1
9.14.2 Performing Homing Function during Positioning Operation ........................................... 9-14-8
9.14.3 Operating by Switching between Speed Control and Position Control ....................... 9-14-12
9.14.4 Operating Simple Position Control with Brake Control .................................................. 9-14-13
9.15 Functions with External Signal Input ......................................................................................... 9-15-1
9.15.1 Using External I/O Input Signal Functions ......................................................................... 9-15-1
9.15.2 Adjusting I/O Input Signal Response .................................................................................. 9-15-3
9.15.3 Adjusting the Analog Input ................................................................................................... 9-15-4
9.16 Functions with External Signal Output ...................................................................................... 9-16-1
9.16.1 Using External I/O Output Signal Functions ...................................................................... 9-16-1
9.16.2 Delaying and Holding Output Signals ................................................................................. 9-16-4
9.16.3 Outputting Monitor Data by Pulse Output ......................................................................... 9-16-5
9.16.4 Outputting Monitor Data by Analog Output....................................................................... 9-16-7

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English