Hitachi WJ C1 Series User Manual

Chapter 10 Monitor Functions
10-3-1
10.3 Check the Information Related to the Internal Status of the Inverter
10.3.1 Monitor the Accumulated Run Time/Accumulated Power-On Time of the Inverter
 How to check the total running time of the inverter after shipment from the factory?
 How to check the total power-on time of the inverter after shipment from the factory?
Accumulated RUN time monitor [d016]
 Displays the accumulated time output to the motor when the inverter is in operation.
 This data is stored in the internal memory of the inverter when the power is shut off.
Code
Item
Description
Data
[d016]
Accumulated RUN time
monitor
Displays the total operation time of the inverter
after shipment from the factory. This data is stored
in the internal memory when the power is shut off.
0 to 999000 (hr)
Accumulated power-on time monitor [d017]
 Displays the accumulated energization time of the inverter.
 This data is stored in the internal memory of the inverter when the power is shut off.
Code
Item
Description
Data
[d017]
Accumulated power-on
time monitor
Displays the total power-on time of the inverter
after shipment from the factory. This data is stored
in the internal memory when the power is shut off.
0 to 999000 (hr)
 [d016] and [d017] cannot be cleared even if parameters are initialized.
Q
A
!
A

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English