Hitachi WJ C1 Series User Manual

Chapter 3 Main Body of the Product
3-2-5
3.2.3 Connecting Remote Operator
 How to operate the inverter by putting operator keypad on the front of the control panel on
which the inverter is installed?
 Connecting the optional remote operator (OPE-SR, OPE-SBK, OPE-SRmini, WOP) enables
operation from outside the panel.
 It is recommended to use the connector cable option ICS-1 (1 m) or ICS-3 (3 m) to connect the
inverter main unit and the remote operator.
 When preparing the connector cable by yourself, use the following cables or cables with
equivalent specifications.
■ TSUKO Cat5e cable with connectors at both ends (twisted wire)
Model: TSUNET-MC350E-MP 8C B 8-8
■ Hitachi Metals, Ltd. Straight wire with connectors at both ends
Model: NETSTAR-C5E PC 24AWGX4P
 Use a connector cable within 3 m. If the cable is more than 3 m, it may cause malfunctioning.
 Do not connect or disconnect the remote operator while the inverter is energized.
!
Q
A

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English