Hitachi WJ C1 Series User Manual

Chapter 2 Outline of This User's Guide/Procedure for Operation
2-1-2
2.1.2 Overview of Each Chapter
 This Guide consists of the following chapters:
Refer also to the chapter to be referred to for each part of the inverter appearance drawing on
the next page.
Chapter
Overview
Chapter 1
Safety Instructions/Risks
Describes safety precautions for installation,
wiring, operation, maintenance, and
inspection.
Chapter 2
Outline of This User's Guide/
Procedure for Operation
Describes the people who will read this
Guide and the purpose of this Guide.
Also describes the overall flow from
installation to test run, the flow chart for
driving the motor, and related reference
points.
Chapter 3
Main Body of the Product
Describes the contents of the inspection at
the time of purchase, the package, the
product model, the contents of the
specification label, and the appearance of
the product.
Chapter 4
Installation
Describes the installation of the inverter,
installation environment and precautions for
installation.
Chapter 5
Wire Connection
Describes the wiring of the inverter and input
power supply, the motor and applicable
peripheral equipment, and the wiring of the
I/O signals for control.
Chapter 6
Operation Check/Residual Risk
Describes the residual risk checklist for
inverter operation.
Chapter 7
Keypad and Related Functions
Describes how to operate the main unit
keypad and related functions.
Chapter 8
Mandatory Setting for Motor
Drive and Test Run
Describes the settings required to drive the
motor and test run.
Chapter 9
Inverter Functions
Describes the functions available with the
inverter.
Chapter 10
Monitor Functions
Describes various data that can be
monitored by keypad, remote operator, etc.
Chapter 11
RS485 Communication
Describes the communication function using
Modbus-RTU(RS485) communication. For
the coil/ register number used by Modbus
communication, see "Chapter 18 List of
Parameters/ Modbus Coil/Register
Numbers".
Chapter 12
ProDriveNext/EzSQ
Describes the outline what can be done by
connecting WJ-C1 to a computer.
Chapter 13
Option Board
Describes applicable option boards.
Chapter 14
Safety Function STO
Describes an overview of using the safety
function STO.
Chapter 15
Tips/FAQ/Troubleshooting
Describes the inverter error status, warning
status, and troubleshooting.
Chapter 16
Maintenance and Inspection
Describes how to perform maintenance and
inspection.
Chapter 17
Specifications/Dimensions/Der
ating
Describes the specifications and dimensions
of this product and current derating
characteristics.
Chapter 18
List of Parameters/Modbus Coil/
Register Numbers
Describes the monitor and parameter list.
Coil/register numbers for Modbus
communication are also described in this
chapter.
Appendix
Additional technical information,
glossary, index, revision history, etc.
The following contents are described.
"Replacement from WJ200", "Glossary",
"Index", "Revision History", etc.

Hitachi WJ C1 Series Specifications

General

Brand	Hitachi
Model	WJ C1 Series
Category	Inverter
Language	English