Hitachi WJ C1 Series

Chapter 9 Inverter Functions
9-9-7
■ For Always enable ("AVR function selection [A081]
*1
" = 00)
■ For Always disabled ("AVR function selection [A081]
*1
" = 01)
■ For Disabled at deceleration ("AVR function selection [A081]
*1
" = 02)
P-N voltage (VDC)
Time
Output voltage (V)
Time
[A082]
Even when the P-N voltage
(inverter input voltage)
fluctuates, the output voltage
to the motor is maintained at
the [A082] setting.
P-N voltage (VDC)
Time
Output voltage (V)
Time
[A083]
=0.000 (s)
Specify [A083] to a value
other than 0.000 (s)
Larger
[A084]
[A081]=00
Smaller
P-N voltage (VDC)
Time
Output voltage (V)
Deceleration
starts
Time
[A083]
=0.000 (s)
Deceleration time specified at
[F003]/[F203]
Specify [A083] to a value
other than 0.000 (s)
[A081]=0
0
Larger
[A084]
Smaller