Chapter 1 Safety Instructions/Risks
1-2-8
1.2.5 Precautions for Maintenance/Daily Inspection
1.2.6 Precautions for Disposal
● Risk of electric shock!
Do not perform maintenance, inspection, and the replacement of parts other
than designated person. (Be sure to remove wristwatches and metal
accessories, e.g., bracelets, before maintenance and inspection work and to
use insulated tools for the work.)
Before inspecting the inverter, be sure to turn off the power supply and more
than 10 minutes. (Confirm that the Charge lamp on the inverter is off and the
DC voltage between terminals [P/+] and [N/-] is 45 V or less.)
● Risk of injury and explosion!
For disposal of the inverter, outsource to a qualified industrial waste disposal
contractor. Disposing of the inverter on your own may result in an explosion of
the capacitor or produce poisonous gas.
Contact your supplier or local Hitachi sales office for fixing the inverter.
A qualified industrial waste disposal contractor includes industrial waste
collector/transporter and industrial waste disposal operator.
Follow the laws and regulations of each country for disposing of the inverter.
To Next Page
Loading...
Need help?
General