Juniper QFX5110 Series User Manual

Figure 209: LEDs on the SFP+ Uplink Ports and on the 4-Port 1-Gigabit Ethernet/10-Gigabit Ethernet
SFP+ Uplink Module for EX4300 Switches Except EX4300-48MP and EX4300-48MP-S Switches
2—1— Status LEDLink activity LED
Figure 210: LEDs on the on the Ports on the 2-Port 40-Gigabit Ethernet QSFP+ Uplink Module for
EX4300-32F Switches
3—1— Status LED of the uplink module portStatus LED of the uplink module
2—Link activity LED of the uplink module port
Figure 211: LEDs on the 8-Port 10-Gigabit Ethernet SFP+ Uplink Module for EX4300-32F Switches
4—1— Status LED the lower portStatus LED of the uplink module
5—2— Status LED the upper portLink activity LED of the lower port
3—Link activity LED of the upper port
568

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable