Juniper QFX5110 Series User Manual

Table 137: Filtering System Log Messages (continued)
Your ActionFunctionField
To reset the field values that are listed in
the Events Filter box, click Reset.
Resets all the fields in the Events Filter box.Reset
To generate a raw report:
1.
Click Generate Raw Report.
The Opening filteredEvents.html window
appears.
2.
Select Open with to open the HTML file
or select Save File to save the file.
3.
Click OK.
Generates a list of event log messages in
nontabular format.
Generate Raw Report
NOTE:
•
Starting in Junos OS
Release 14.1X53, a Raw
Report can be
generated from the log
messages being loaded
in the Events Detail
table. The Generate
Raw Report button is
enabled after the event
log messages start
loading in the Events
Detail table.
•
After the log messages
are completely loaded
in the Events Detail
table, Generate Raw
Report changes to
Generate Report.
To generate a formatted report:
1.
Click Generate Report.
The Opening Report.html window
appears.
2.
Select Open with to open the HTML file
or select Save File to save the file.
3.
Click OK.
Generates a list of event log messages in
tabular format, which shows system details,
events filter criteria, and event details.
Generate Report
NOTE: Starting in Junos
OS Release 14.1X53, a
Formatted Report can be
generated from event log
messages being loaded in
an Events Detail table. The
Generate Report button
appears only after event
log messages are
completely loaded in the
Events Detail table. The
Generate Raw Report
button is displayed while
event log messages are
being loaded.
642

Juniper QFX5110 Series Specifications

General

Rack Units	1U
Operating System	Junos OS
Form Factor	Fixed
Management	CLI, SNMP, NETCONF
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5% to 90% non-condensing
AC Power Input	100-240 VAC
Power Supply	Redundant, hot-swappable