■ Use to display the bulk statistics data collection configuration.
■ Field descriptions
■ AdminStatus—Administrative status of the bulk statistics application
■ OperStatus—Operational status of the bulk statistics application, enabled or
disabled
■ Interface Description Setting—Method used to encode the ifDescr object:
common, proprietary, industry-common
■ File Format—End of the line format in bulkstats files, carriage return and
line feed (CR+LF) or LF
■ Current Time—Current system time used to compare with the collection
stop/start time
■ Intervals—Number of times the bulk statistics collector has cycled through
a collection
■ PrimaryXfers—Number of times the bulk statistics collector has attempted
a data file transfer to a primary server
■ PrimaryFails—Number of primary server transfer failures
■ SecondaryXfers—Number of times the bulk statistics collector has attempted
a data file transfer to a secondary server
■ SecondaryFails—Number of secondary server transfer failures
■ BulkStats Collector Information:
■ Index—Bulk statistics collector index number
■ CurrSize—Current size of the bulk statistics file in bytes
■ MaxSize—Maximum size configured for the bulk statistics file in bytes
■ Intrvl—Time interval between bulk collections in seconds
■ Mode—How often the collector is set up to collect statistics:
■ periodic—Collects statistics periodically
■ single-interval—Collects statistics once only
■ XferMode—Collect mode configured for the collector:
■ auto—Agent transfers file when interval expires
■ manual—Network management system or the user initiates transfers
■ onFull—Agent transfers file when it reaches the maximum size
■ State
■ inProg—Collector is properly configured and currently active
■ notInSvc—Collector has been decommissioned by a management
client
Collecting Bulk Statistics ■ 205
Chapter 4: Configuring SNMP
To Next Page
Loading...