Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

■ See show bulkstats collector max-size.
show bulkstats collector transfer-mode
■ Use to display information about the bulk statistics transfer mode configuration.
■ Field descriptions
■ Index—Index number of the bulk statistics collector
■ Transfer-Mode:
■ auto-xfer—Server automatically transfers the bulk statistics files to a
remote FTP server
■ manual-xfer—Server expects the user to transfer bulk statistics files
■ on-file-full—Server transfers the bulk statistics file when the file reaches
its maximum size
■ Primary-Receiver—Receives the bulk statistics sent by the collector
■ Secondary-Receiver—Serves as a backup to the primary receiver
■ Example
host1#show bulkstats collector transfer-mode
Index Transfer-Mode Primary-Receiver Secondary-Receiver
----- ------------- ---------------- ------------------
1 auto-xfer 1 2
■ See show bulkstats collector transfer-mode.
show bulkstats interface-type
■ Use to display information about the bulk statistics interface types configuration.
■ Field descriptions
■ Interface Types:
■ Index—Index number of the interface type entry
■ Type—Interface type for which bulk statistics collection is configured
■ CollectorIndex—Index of the collector to which the interface type applies
■ State
■ active—Interface type is properly configured and currently active
■ notInSvc—Interface type has been decommissioned by a management
client
■ notReady—Interface type does not have enough configuration
information to go active
■ error—Configuration/operational error
210 ■ Collecting Bulk Statistics
JUNOSe 11.1.x System Basics Configuration Guide