Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

■ Example
host1#show bulkstats interface-type
Interface Types:
Index Type Collector State
----- ---------------------- --------- --------
1 ppp 1 active
■ See show bulkstats interface-type.
show bulkstats receiver
■ Use to display information about the remote file configuration of the bulk statistics
receiver.
■ Field descriptions
■ Index—Index number of the receiver
■ RemoteFileName—Hostname, path, and filename of the remote FTP server
■ Index—Index number of the receiver
■ State
■ active—Receiver is properly configured and currently active
■ notInSvc—Receiver has been decommissioned by a management client
■ notReady—Receiver does not have enough configuration information
to go active
■ error—Configuration/operational error
■ Status
■ Success
■ Copy source does not exist or is unreachable
■ Copy failed
■ File in use
■ Example
host1#show bulkstats receiver
Index RemoteFileName
----- ----------------------------------------------
1 f:/upload/bulkStas.sts
Index State Status
----- -------- ---------------------------------------------
1 notReady Copy source does not exist or is unreachable
■ See show bulkstats receiver.
Collecting Bulk Statistics ■ 211
Chapter 4: Configuring SNMP