Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

■ Wrong Digest Report PDUs—Number of packets received by the SNMP
engine that were dropped because they did not contain the expected
digest value
■ Decryption Error Report PDUs—Number of packets received by the
SNMP engine that were dropped because they could not be decrypted
■ Example
host1#show snmp
Contact: Joe Administrator
Location: Network Lab, Bldg 3 Floor 1
538 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
695 Number of requested variables
0 Number of altered variables
26 Get-request PDUs
512 Get-next PDUs
0 Set-request PDUs
0 Unknown security models
0 Unavailable contexts
538 SNMP packets out
0 Too big errors (Maximum packet size 1500)
10 No such name errors
0 Bad values errors
0 General errors
538 Get-response PDUs
0 SNMP trap PDUs
0 Invalid Message Report PDUs
0 Unknown PDU Handler Report PDUs
0 Unknown Context Report PDUs
0 Unsupported Security Level Report PDUs
0 Not in time Window Report PDUs
0 Unknown Username Report PDUs
0 Unknown Engine ID Report PDUs
0 Wrong Digest Report PDUs
0 Decryption Error Report PDUs
■ See show snmp.
show snmp access
■ Use to display information about the groups you configured.
■ Field descriptions
■ Group Name—Name of the group
■ Model—Security model; for example, user-based security model (USM)
■ Level—Method for authentication and privacy
■ none—No authentication and no privacy
■ auth—Authentication only
■ priv—Authentication and privacy
242 ■ Monitoring SNMP
JUNOSe 11.1.x System Basics Configuration Guide

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English