Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

■ Read—Name of the view for read access
■ Write—Name of the view for write access
■ Notify—Name of the view for notification
■ Storage—SNMP storage type, volatile or nonvolatile
■ Example
host1#show snmp access
Group Name Model Level Read Write Notify
------------------ ----- ----- ----------- ----------- ---------
admin usm priv everything everything everything
mirror usm priv mirrorAdmin mirrorAdmin mirrorAdmin
public usm none user none none
private usm auth user user user
■ See show snmp access.
show snmp community
■ Use to display information about the SNMP communities.
■ Field descriptions
■ Community—Name of the community and the associated virtual router
■ View—Name of the view
■ Priv—Access privilege for the view
■ ro—Read-only access
■ rw—Read-write access
■ admin—All privileges
■ AccList—Number of access lists associated with this community
■ Example
host1#show snmp community
Community View Priv AccList
------------------------------------------ ---- -------
admin@default everything rw 0
private@default user rw 0
public@default user ro 0
■ See show snmp community.
show snmp group
■ Use to display the list of available groups. Detailed information is available through
the show snmp access command.
■ Field descriptions
Monitoring SNMP ■ 243
Chapter 4: Configuring SNMP

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English