Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

■ groupName—Name of the group
■ securityModel—SNMP security model
■ v1—SNMPv1
■ v2c—SNMPv2c
■ usm—SNMPv
■ authenticationLevel—Method for authentication and privacy
■ none—No authentication and no privacy
■ auth—Authentication only
■ priv—Authentication and privacy
■ readView—Name of the view for read access
■ writeView—Name of the view for write access
■ notifyView—Name of the view for notification
■ storageType—SNMP storage type
■ volatile—Loses contents when power is lost
■ nonVolatile—Does not lose contents when power is lost
■ Example
host1#show snmp group
Group Name Storage Type
---------------------------------------- ---------------
group1 Volatile
group2 NonVolatile
admin Permanent
mirror Permanent
public Permanent
private Permanent
■ See show snmp group.
show snmp notificationLog
■ Use to display the configuration of the SNMP notification log.
■ Field descriptions
■ Global Age Out Value—Ageout for traps in the notification log tables
■ Global Entry Limit Value—Maximum number of notifications kept in all
notification log tables
■ Example
host1#show snmp notificationLog
Global Age Out Value: 1440 minutes
244 ■ Monitoring SNMP
JUNOSe 11.1.x System Basics Configuration Guide