EasyManua.ls Logo

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
640 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
below -5C is too cold
above 79C is too hot
low temperature warning below 10C
high temperature warning above 51C
IOA temperature ranges
below -5C is too cold
above 79C is too hot
low temperature warning below 10C
high temperature warning above 56C
See show environment.
show fabric weights
Use to display multicast-to-unicast ratio for the router switch fabric.
Field descriptions
multicastRatio value of multicast bandwidth
unicastRatio value of unicast bandwidth
Example
host1#show fabric weights
Fabric scheduler weights: multicast = 1 , unicast = 8
See show fabric weights.
show hosts
Use to display a list of configured network servers.
Field descriptions
Static Host TableInformation about the connected static hosts
nameName of the host
ip addressIPv4 or IPv6 address of the host
type of hostType of host; for example, ftp means an FTP server
NFS Host TableInformation about connected NFS servers
nameName of the NFS server
useridIdentity for the user
groupidIdentity for the group
Example
host1#show hosts
Static Host Table
-----------------
name ip address type
---- ----------- ----
host1 10.2.0.124 ftp
hFtp 10.5.6.7 ftp
Monitoring the System 343
Chapter 5: Managing the System

Table of Contents

Related product manuals