hTftp 10.5.6.7 tftp
Static Host Table
-----------------
name ip address type
----- ------------------------------------- ----
george 1111:2222:3333:4444:5555:6666:7777:8888 ftp
dsw 10.10.121.42 ftp
deab 10.6.128.12 ftp
mFtp 10.10.121.11 ftp
mTftp 10.10.121.11 tftp
mary 10.10.121.11 ftp
sd 10.10.121.80 ftp
NFS Host Table
--------------
name userid groupid
---- ------ -------
deab 2001 100
■ See show hosts.
show processes cpu
■ Use to display the CPU use.
■ Field descriptions
■ task name—Name of the process
■ times invoked—Number of times the process has been invoked
■ invocations per second—Frequency of the process invocation
■ total running time (msec)—Time the process has been running
■ percent running time—Percentage of the total running time attributable to
this process
■ average time per invocation (usec)—Average number of microseconds per
invocation of this process
■ 5 second utilization (%)—CPU use by the process for the last 5 seconds
■ 1 minute utilization (%)—CPU use by the process for the last minute
■ 5 minute utilization (%)—CPU use by the process for the last 5 minutes
■ Example
host1# show processes cpu
Process Statistics
------------------
total
invocations running percent
times per time running
task name invoked second (msec) time
--------------------- ------- ----------- -------- -------
aaaAtm1483Config 1 0 0 0%
aaaServer 52 0 260 0%
344 ■ Monitoring the System
JUNOSe 11.1.x System Basics Configuration Guide
To Next Page
Loading...