Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X User Manual

3 --- --- --- --- ---
4 CT3/T3-12 I/O 4305316605 3500010801 A02
5 OC3(8)-MM I/O 4304443600 4500001501 A03 4
6 GE-SFP I/O 4605310064 4500002001 A05 1
base
slot MAC address
---- --------------
0 ---
1 0090.1aa0.577a
2 ---
3 ---
4
5 0090.1a41.7c68
6 0090.1aa0.6216
■ See show hardware.
show last-reset
Use to display the reason for the system’s last user-directed reload or error-caused
reset.
■
■ Example
host1#show last-reset
last reset: power cycle
■ See show last-reset.
show reload
Use to display the system’s reload status.■
■ Example
host1#show reload
reload scheduled for TUE OCT 2 2001 10:10:00 UTC
■ See show reload.
show version
Use to display the configuration of the system hardware and the software version.■
■ Example
host1#show version
Juniper Edge Routing Switch ERX-700
Copyright (c) 1999-2005 Juniper Networks, Inc. All rights reserved.
System Release: erx_7-1-0.rel Partial
Version: 7.1.0 [BuildId 4518] (December 21, 2005 11:23)
System running for: 25 days, 3 hours, 31 minutes, 5 seconds
(since THU DEC 22 2005 11:36:41 UTC)
slot state type admin spare running release slot uptime
---- ------- ---------- ------- ----- ------------------ --------------
0 standby SRP-10Ge enabled --- erx_7-1-0.rel ---
1 online SRP-10Ge enabled --- erx_7-1-0.rel 25d03h:28m:49s
2 --- --- --- --- --- ---
Displaying Boot Information ■ 519
Chapter 9: Booting the System

Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Specifications

General

Brand	Juniper
Model	SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X
Category	Software
Language	English