Example 7 host1(config)#privilege-group membership clear dailyAdmin
host1(config)#privilege-group membership dailyAdmin add dailyTroll
In Example 7, privilege group 10 alias dailyAdmin has one member: privilege group
6 alias dailyTroll.
Example 8 host1(config)#no privilege-group membership 9
Example 8 reverts one privilege group membership to its default setting. Prior to the
execution of this command, the following group memberships were in place:
reachablemembergroup
12,0128
0--9
9,0910
10,9,01011
11,10,9,01112
Reverting privilege group 9 to its default gives it one member: privilege group 8. This
creates the circular dependency: 8 contains 12, 12 contains 11, 11 contains 10, 10
contains 9, and 9 contains 8.
Example 9 host1(config)#no privilege-group membership
In Example 9, privilege group membership reverts to the default setting. All privilege
groups revert to hierarchical settings: 15 contains 14, 14 contains 13, 13 contains
12, and so forth. Privilege group 0 is reachable from every privilege group.
Example 10 host1(config)#no privilege-group membership 7
In this example, one privilege group membership reverts to its default setting. Privilege
group 7 contains group 6.
Example 11 host1(config)#no privilege-group alias
In Example 11, all alias settings are removed.
Example 12 host1#show privilege group
privilege privilege directly all
group group reachable reachable
alias groups groups *
---------- ---------- -------- -----------------
0 minUser -- --
1 -- -- 0
2 -- 1 0 1
3 -- 2 0 1 2
CLI Command Privileges â– 55
Chapter 2: Command-Line Interface
To Next Page
Loading...
Need help?
General
