Keysight U8903B - Page 166

3 Audio Generator Functions
166 Keysight U8903B User’s Guide
Sample Freq
Press the Sample Freq softkey to select the sample frequency value.
–Not indicated
– 22.05 kHz
–24 kHz
–32 kHz
–44.1 kHz
–48 kHz
–88.2 kHz
–96 kHz
– 176.4 kHz
–192 kHz
Freq Scaling Press the Freq Scaling softkey to enable or disable frequency scaling.
Chan Mode
Press the Chan Mode softkey to select the channel mode.
–Not indicated
–2-channel
– Single channel
– Primary-Secondary
–Stereo
– Reserved 1
– Reserved 2
– Mono Double Rate
– Left Double Rate
– Right Double Rate
– Multichannel
User Bits
Press the User Bits softkey to select the user bits type.
–Not indicated
–192-bit block
– Reserved for AES18
– User defined
– Reserved for Metadata
– As in IEC60958-3
Aux Bits
Press the Aux Bits softkey to select the auxiliary bits.
– 20-bit not defined
– 24-bit main audio
– 20-bit single
– Reserved
Table 3-43 Digital Generator > AES Config > Edit Bits (Professional format) menu description (continued)
Menu Description