Keysight U8903B - Page 167

Audio Generator Functions 3
Keysight U8903B User’s Guide 167
Word Length
Press the Word Length softkey to select the word length.
24 bits maximum word length
–Not indicated
–20 bits
–21 bits
–22 bits
–23 bits
–24 bits
20 bits maximum word length
–Not indicated
–16 bits
–17 bits
–18 bits
–19 bits
–20 bits
Alignment
Press the Alignment softkey to select the alignment level.
– Not Indicated
– –18.06 dBFS
––20 dBFS
– Reserved
Multi-Channel
Press the Multi-Channel softkey to select the multi-channel status.
– Defined
– Undefined
Multi-Ch Mode
This is only available when the multi-channel status is set to Defined.
Press the Multi-Ch Mode softkey to select the multi-channel mode.
– Mode 0
– Mode 1
– Mode 2
– Mode 3
– User Defined
Channel Num
Press the Channel Num softkey to set the channel number.
– 1 to 16 (Defined multi-channel status)
– 1 to 128 (Undefined multi-channel status)
Ref Signal
Press the Ref Signal softkey to select the reference signal type.
– Not a ref. signal
–Grade 1
–Grade 2
– Reserved
Channel Origin Press the Channel Origin softkey to set the channel origin value (4 alphanumeric digit).
Channel Dest Press the Channel Dest softkey to set the channel destination value (4 alphanumeric digit).
Local Addr
Press the Local Addr softkey to set the local address value.
–0 to 2
32
–1
Table 3-43 Digital Generator > AES Config > Edit Bits (Professional format) menu description (continued)
Menu Description