7 Test Sequence Application
304 Keysight U8903B User’s Guide
Input configuration (Bluetooth)
The TSA > Project > Test > IO Configuration > Input Configuration menu page is displayed
as shown in Figure 7-9.
Figure 7-10 TSA > Project > Test > IO Configuration > Input Configuration menu page (Bluetooth)
Table 7-9 TSA > Project > Test > IO Configuration > Input Configuration menu description (Bluetooth)
Menu Description
Channels
Displays the number of input channels in use. If the Profiles consist of A2DP, the input channels in use will be fixed to 2
channels. If the Profiles consist of only HFP or HFP and AVRCP, the input channels in use will be fixed to 1 channel.
Device Press the Device softkey to select the paired or connected Bluetooth device.
Profiles
Press the Profiles softkey to select the profile that will be used in the test. If the connected Bluetooth device is selected in
Device, the profile used will be fixed to the connected profile(s).
–A2DP
–HFP
–AVRCP
Link Config
Press the Link Config softkey to configure the Bluetooth link settings. Refer to “Link Configuration (Bluetooth
Generator)” on page 146.
To Next Page
Loading...
