Keysight U8903B - Page 446

A Appendixes
446 Keysight U8903B User’s Guide
Waveform Config
(Multitone)
Custom
Apply
Apply the current setting on the selected tone for the
custom multitone waveform.
Optimize
Optimize the crest factor for the custom multitone
waveform.
Frequency
Set the frequency value for the custom multitone
waveform.
Amplitude
Set the amplitude value for the custom multitone
waveform.
Phase Set the phase value for the custom multitone waveform.
Add Above
Add the tone above the selected tone for the custom
multitone waveform.
Add Below
Add the tone below the selected tone for the custom
multitone waveform.
Remove
Remove the selected tone for the custom multitone
waveform.
Clear
Clear all the tones in the custom multitone waveform
list.
Link Config Device Scan
Device Search
Search for the discoverable Bluetooth devices within
range.
Max Scan 1 to 16
Set the maximum number of Bluetooth devices to be
identified.
Filter Class
–All
– Custom
Select the filter class type.
Custom Set the Bluetooth device class.
Refresh Device
Refresh the friendly name of the selected Bluetooth
device.
Table A-6 Bluetooth generator menu tree description (continued)
Level 1 Level 2 Level 3 Level 4 Description