Keysight U8903B - Page 488

A Appendixes
488 Keysight U8903B User’s Guide
Trace Settings
Math
Apply Math
Apply the corresponding math function to the trace data or turn off the
math function.
–On
–Off
Function
Select the math function to be applied on the active trace.
–f(Source)
–f(Source) + x
–f(Source) - x
–f(Source) * x
–f(Source) / x
X Set the x value in the selected math function.
Unit
–V
–dBV
–dBu
–W
–dBm
–dBSPL
Select the trace unit type.
Persistence
Persist Enable or disable the persistence on the active trace.
Persist Count
Set the number of previous sets of trace data to be displayed in the graph
before they are removed.
This setting is only available when persistence is enabled.
Axis
– Primary
–Secondary
Attach the active trace to the primary or secondary axis.
Color
–Yellow
–Cyan
–White
–Pink
–Green
–Orange
–Red
–Purple
Select the color of the active trace.
Display Option
–Graph
– Data Table
–Marker Table
– Statistics
–Harmonics
– Signal Analysis
Select the graph analysis display option.
Running mode
Continuous
Single
Select the graph analysis running mode.
Table A-10 Graph analysis menu tree description (continued)
Level 1 Level 2 Level 3 Description