Keysight U8903B - Page 489

Appendixes A
Keysight U8903B User’s Guide 489
Measurement
Enabled
–On
–Off
Enable or disable the measurements in the graph.
Measurement 1
Interface Select the measurement interface type.
Channel Select the desired channel to perform the measurement.
Function No Select the function to be displayed based on the function number (1 to 4).
Measurement 2
Interface Select the measurement interface type.
Channel Select the desired channel to perform the measurement.
Function No Select the function to be displayed based on the function number (1 to 4).
Table A-10 Graph analysis menu tree description (continued)
Level 1 Level 2 Level 3 Description