Keysight U8903B - Page 491

Appendixes A
Keysight U8903B User’s Guide 491
Plot View
Axis Settings
Active Axis
– Primary
–Secondary
Select the active axis.
Left Set the left axis value.
Right Set the right axis value.
Top Set the top axis value.
Bottom Set the bottom axis value.
X-Scale
– Linear
–Log
Select the X-axis scale type.
Y-Scale
– Linear
–Log
Select the Y-axis scale type.
Plot Settings
Data Channel
Select the trace data channel number to be
plotted.
Y Data
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
Select the Y-axis trace data source.
Y2 Data
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
Select the second Y-axis trace data source.
X Data
– S: <sweep
parameter>
– F1: <measurement
function 1>
– F2: <measurement
function 2>
– F3: <measurement
function 3>
– F4: <measurement
function 4>
Select the X-axis trace data source.
Wrap Phase
–On
–Off
Enable of disable the wrap phase.
Table A-11 Sweep function menu tree description (continued)
Level 1 Level 2 Level 3 Level 4 Description