A Appendixes
492 Keysight U8903B User’s Guide
Plot Settings
Hold Type
–None
–Average
–Max
–Min
Select the data type to be plotted in the graph.
Edit points
Data Channel
Select the trace data channel number to be
plotted.
Wrap Phase
–On
–Off
Enable of disable the wrap phase.
Goto Point Set the sweep point number to go to.
Point Value Set the currently selected sweep point value.
Add Point Add a sweep point.
Remove Point Remove the selected sweep point.
Load Points
Load the sweep points from a file.
Refer to “Append ix 13: Recall Menu Tree” on
page 494 for the recall menu tree.
Plot View
Save Points
Save the sweep points to a file.
Refer to “Append ix 12: Save Menu Tree” on
page 493 for the save menu tree.
Save Pts
Save the sweep points to a file.
Refer to “Append ix 12: Save Menu Tree” on
page 493 for the save menu tree.
Table A-11 Sweep function menu tree description (continued)
Level 1 Level 2 Level 3 Level 4 Description
To Next Page
Loading...
