Keysight U8903B - Page 498

A Appendixes
498 Keysight U8903B User’s Guide
IO Configuration
Settings: Input
Configuration
(Bluetooth)
Channels
Select the number of input channels in use.
Device Select the paired Bluetooth device.
Profiles
–A2DP
–HFP
–AVRCP
Select the U8903B’s Bluetooth card profile.
Link Config Configure the Bluetooth link settings.
Coupling
–DC
–AC
Select the input coupling type.
Reference
Voltage Set the input voltage value.
Ratio Set the reference ratio value.
Frequency Set the reference frequency value.
Sound Lvl Set the sound level value.
Calibrator Lvl Set the calibration level value value.
Volt/FS Set the volts/FS reference value.
Properties
Name Rename the IO configuration.
Sub-Steps: RunIO
Configuration
Add Sub-Step
Add sub-step to the list.
– Delay
–Prompt
– Sent SCPI
Edit Move the RunIO Configuration sub-step in the list.
Sub-Steps:
Delay
Enable
Enable or disable the delay sub-step.
–On
–Off
Add Sub-Step
Add sub-step to the list.
– Delay
–Prompt
– Sent SCPI
Delete Sub-Step Delete the selected sub-step.
Edit
Move or copy the selected sub-step, or paste a
copied sub-step after the selected sub-step.
Table A-14 Test sequence menu tree description (continued)
Tab Level 1 Level 2 Level 3 Description