Keysight U8903B - Page 550

A Appendixes
550 Keysight U8903B User’s Guide
Graph Properties
Title Edit the graph title.
X-axis
Auto Scale
Enable or disable the X-axis autoscale.
–On
–Off
Spacing
Select the X-axis spacing type.
–Log
– Linear
Unit Select the X-axis unit type.
Left
Set the X-axis left value.
This setting is only available when the X-axis autoscale is disabled.
Right
Set the X-axis right value.
This setting is only available when the X-axis autoscale is disabled.
Center
Set the X-axis center value.
This setting is only available when the X-axis autoscale is disabled.
Span
Set the X-axis span value.
This setting is only available when the X-axis autoscale is disabled.
Y-axis
Auto Scale
Enable or disable the Y-axis autoscale.
–On
–Off
Spacing
Select the Y-axis spacing type.
–Log
– Linear
Unit Select the Y-axis unit type.
Y-axis
Top
Set the Y-axis bottom value.
This setting is only available when the Y-axis autoscale is disabled.
Bottom
Set the Y-axis top value.
This setting is only available when the Y-axis autoscale is disabled.
Trace
Trace
Select the analyzer trace channel.
– CH1 to CH8
State
Enable or disable the trace.
–On
–Off
Color
Select the trace color.
– Yellow
–Cyan
–White
–Pink
–Green
–Orange
–Red
–Purple
Table A-38 Measurement results > Graph menu tree description (continued)
Level 1 Level 2 Level 3 Description