Keysight U8903B - Page 551

Appendixes A
Keysight U8903B User’s Guide 551
Graph Properties
(This is only applicable
for POLQA
measurement
MOS-LQO and Delay
results)
Title Edit the graph title.
Auto Scale
–On
–Off
Enable or disable the X-axis autoscale.
Left
Set the X-axis left edge value.
This setting is only available when the Autoscale is disabled.
Right
Set the X-axis right edge value.
This setting is only available when the Autoscale is disabled.
Top
Set the X-axis top edge value.
This setting is only available when the Autoscale is disabled.
Bottom
Set the Y-axis bottom edge value.
This setting is only available when the Autoscale is disabled.
Table A-38 Measurement results > Graph menu tree description (continued)
Level 1 Level 2 Level 3 Description