180
Be aware that the magnet needs to be within 20 (0.78 inches) of the marking (2)
in order to be displayed as closed. You can check the status of the sensor in the
menu “Sensors” “List” of the alarm panel.
Note:
If the distance between sensor and magnet is sufficient, you can use one door contact
for a counter window.
If you install the sensor at the bottom of a window, you can still tilt the window without
triggering an alarm. We advice you to not install the contact in this fashion, since it can
be a security risk.
Do not install the door contact directly on metal/ steel doors. Use rubber coating to
counter radio interferences.
Do not bridge the jumper (3)! Otherwise, the window/ door contact will not answer to
the regular battery supervision of the alarm panel.
To Next Page
Loading...