218
Power supply
The light switch V2 is powered by the connected power circuit of your home.
Supervision
Every 30 minutes, the light switch V2 transmits a supervision signal to the alarm panel. If
you press a button of the light switch, a supervision signal is transmitted as well.
Control via the alarm panel
The light switch V2 can be controlled the menu “Smarthome” “Wireless plugs” or
“Home” “Radio switch list”.
Note
You can set up rules for the activation or deactivation of the light switch in the menu
“Smarthome” “Automation”.
In the menu “Smarthome” “Wireless plugs” “Group settings”, you can group the
light switch V2 with other light switches or dimmers to control them together as a group.
The maximum load is 2.5A
The light switch V2 is no toggle switch; you cannot execute cross-connections of
several light switches V2.
After a blackout, the light switch returns to its last switching state before the blackout.
The light switch V2 is not compatible with frames or covers of other manufacturers.
The light switch is not compatible with the wireless repeater.
The light switches (all ZigBee devices) cannot be saved in the backup file of the alarm
panel.
To Next Page
Loading...