215575 140 Revision B
Figure 4.76: Case IH Combine Display
3. Set the appropriate HEADER STYLE.
$
%
Figure 4.77: Case IH Combine Display
4. Set the AUTO REEL SPEED SLOPE setting.
5. Set the HEADER PRESSURE FLOAT setting to NO (A) if
equipped, and ensure that the REEL DRIVE setting is set to
HYDRAULIC (B).
%
$
Figure 4.78: Case IH Combine Display
6. Select YES (A) from the REEL FORE-BACK list (if applicable).
7. Set HEIGHT SENSITIVITY (B) to the desired value. The
recommended starting value is 180.
AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
