215575 208 Revision B
$
%
Figure 4.214: New Holland Combine Display
7. Set the values for HHC HEIGHT SENSITIVITY (A) and HHC
TILT SENSITIVITY (B) according to harvest conditions.
4.15.2 Checking Voltage Range from Combine Cab (New Holland CR Series)
To ensure that the auto header height control (AHHC) system on your header works correctly with your New Holland CR
series combine (model year 2015 or later), the output voltage from the header height control sensors must be verified.
NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to combine
operator’s manual for updates.
DANGER
Check to be sure all bystanders have cleared the area.
1. Position the header 150 mm (6 in.) above the ground.
$
Figure 4.215: New Holland Combine Display
2. Select DIAGNOSTICS (A) on the main page. The
DIAGNOSTICS page appears.
AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
