MacDon PW8 - Versatile; Attaching Header to Versatile Combine

215575 70 Revision B

$
%
Figure 3.99: Driveline
10. Slide the driveline onto storage hook (A) on header and
rotate disc (B) to secure the driveline.

$
%
&
Figure 3.100: Disengaging Header
11. Lift lever (A) and pull and lower handle (B) to disengage
feeder house/header lock (C).
12. Lower the feeder house until it disengages from the header
support.
13. Slowly back the combine away from the header.
3.10.6 Versatile
This section provides instructions for attaching/detaching the PW8 Pick-Up Header to/from Versatile RT490 combines.
Attaching Header to Versatile Combine
Attach the header to the combine to be able to operate the header using the combine operator’s console.
DANGER
To avoid injury or death from unexpected start-up of the machine, always stop the engine and remove the key from
the ignition before leaving the operator’s seat for any reason.
DANGER
Check to be sure all bystanders have cleared the area.
OPERATION