215575 24 Revision B
3.2 Operational Safety
Follow all the safety and operational instructions given in this manual and in your combine operator's manual. If you do not
have a combine operator’ s manual, get one from your Dealer and read it thoroughly.
CAUTION
• Never start or move the machine until you are sure that all bystanders have cleared the area.
• To avoid bodily injury or death from the unexpected startup of machine, always stop the combine engine and
remove the key before adjusting the machine or removing plugged material.
• Check for excessive vibration and unusual noises. If there is any indication of trouble, shut the machine down and
inspect it.
CAUTION
Follow the proper shutdown procedure:
• Engage the combine brake.
• Turn off the engine and remove the key.
• Wait for all movement to stop.
• Dismount and engage safety props before inspecting the raised machine.
• Operate only in daylight or good artificial light.
OPERATION
To Next Page
Loading...
