215575 35 Revision B
3.7 Shutting Down the Machine
Perform this procedure to safely shut down the combine and pick-up header.
DANGER
Never start or move the machine until you are sure all bystanders have cleared the area.
Before leaving the combine seat for any reason, follow this entire procedure:
1. Park the combine on level ground if possible.
2. Lower the header fully.
3. Place all controls in neutral, and engage the combine brake.
4. Shut down the engine, and remove the key from the ignition.
5. Wait for all movement to stop before leaving the operator’s seat.
OPERATION
To Next Page
Loading...
