Recommended Fluids and Lubricants
Lubricate header with the specified grease and lubricant for maximum service life.
Keep your machine operating at top efficiency by using only clean lubricants and by ensuring the following:
• Use clean containers to handle all lubricants.
• Store lubricants in an area protected from dust, moisture, and other contaminants.
Table .2 Recommend Fluids and Lubricants
Lubricant
Specification
Description
Use
Grease
SAE
multi-purpose
High temperature extreme pressure (EP2) performance
with 1% max molybdenum disulphide (NLGI Grade 2)
lithium base
As required, unless
otherwise specified
Extreme pressure (EP) performance with 1.5–5%
molybdenum disulphide (NLGI Grade 2) lithium base
Drive motor shaft
Oil
SAE 30
—
Auger drive chain
To Next Page
Loading...
