215575 34 Revision B
3.6 Daily Start-Up Check
Perform this procedure before starting the combine and pick-up header.
Figure 3.18: Safety Equipment
CAUTION
• Ensure that the combine and header are properly attached
and that all controls are in neutral and the combine brake is
engaged.
• Clear the area of bystanders, pets, etc. Keep children away
from the machinery. Walk around the machine to make sure
no one is under, on, or close to it.
• Wear close-fitting clothing and protective shoes with slip-
resistant soles.
• Remove foreign objects from the machine and surrounding
area.
• Carry with you any protective clothing and personal safety
devices that could be necessary through the day. Don’t take
chances. You may need a hard hat, protective glasses or
goggles, heavy gloves, a respirator or filter mask, or wet weather gear.
• Protect against noise. Wear suitable hearing protection devices such as ear muffs or ear plugs to help protect against
objectionable or loud noises.
Perform the following checks each day before startup:
1. Check the machine for leaks or any parts that are missing, broken, or not working correctly.
NOTE:
Follow the proper procedure when searching for pressurized fluid leaks to prevent injuries. For instructions, refer to
5.9.5 Hydraulic Hoses and Lines, page 304.
2. Clean all lights and reflective surfaces on the machine and check the lights for proper operation.
3. Perform all daily maintenance procedures. Refer to 5.2.1 Maintenance Schedule/Record, page 216 for details.
OPERATION
To Next Page
Loading...
