215575 190 Revision B
$
Figure 4.174: John Deere Combine Display
1. Press DIAGNOSTIC icon (A) on the main page of the
combine display. The CALIBRATION page appears.
$
Figure 4.175: John Deere Combine Display
2. Select CALIBRATIONS drop-down menu (A) to view the list
of calibration options.
$
Figure 4.176: John Deere Combine Display
3. Press arrow (A) to cycle up through the calibration options
and select FEEDER HOUSE FORE/AFT TILT RANGE.
AUTO HEADER HEIGHT CONTROL
To Next Page
Loading...
