Introduction
The MacDon PW8 Pick-Up Headeris designed to pick up windrows and feed them into a combine. This manual contains
operating and maintenance procedures for the pick-up header for the following combines:
Combine Model
Case IH
50/60/7088, 51/61/7130, 51/61/7140, 70/8010, 71/81/9120, 72/82/9230, and 72/82/9240
Challenger
®
600B Series, IDEAL™ 7, 8, and 9 Series
Fendt
®
IDEAL™ 7, 8, and 9 Series
Gleaner
®
R65, 66, 67, 75, 76, 77, and all S and A Series
John Deere
96/97/9860STS, 96/97/9870, S650/660/670/680/690, 9660WTS, and T670
Massey Ferguson
®
9005/9500 Series, IDEAL™ 7, 8, and 9 Series
New Holland
All CR/CX Series
Versatile
RT490
When setting up the machine or making adjustments, review and follow the recommended machine settings in all relevant
MacDon publications. Failure to do so may compromise machine function and machine life and may result in a hazardous
situation.
MacDon provides warranty for Customers who operate and maintain their equipment as described in this manual. A copy
of the MacDon Industries Limited Warranty Policy, which explains this warranty, should have been provided to you by your
Dealer. Damage resulting from any of the following conditions will void the warranty:
• Accident
• Misuse
• Abuse
• Improper maintenance or neglect
• Abnormal or extraordinary use of the machine
• Failure to use the machine, equipment, component, or part in accordance with the manufacturer’s instructions
Conventions
• Right and left are determined from the operator’s position. The front of the header is the side that faces the crop; the
back of the header is the side that connects to the combine.
• Unless otherwise noted, use the standard torque values provided in Chapter 8.1 Torque Specifications, page 333.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our website
(www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required).
215575 i Revision B
To Next Page
Loading...
