Matrix PRASAR UCS - Page 391

382 Matrix PRASAR UCS System Manual
Similarly, all local numbers start with 2, so enter this number in the number string column, and select the
SIP trunks in the order of preference. As in this example, you have only two SIP trunks, so you may keep
the same two trunks as your preference.
• If you have finished entering the number strings, and selecting the preferred trunks for the numbers,
configure the Number-based LCR using Jeeves.
Configuring Number-based LCR using Jeeves
• Login as System Engineer.
• Under Configuration, click Least Cost Routing (LCR).
• Click Number-based.
• Enter the values of the Number-based LCR you prepared on the sheet of paper in the appropriate fields.
Index Number
Cost Factor
Preference
1
Preference
2
Preference
3
Preference
4
1 9 04 03 05 06
20904060503
3 2 01 02 01 02
4
5
:
:
99