Matrix PRASAR UCS System Manual 381
Configuring Time-based LCR using Jeeves
• Login as System Engineer.
• Under Configuration, click Least Cost Routing (LCR).
• Click Time-based.
• Enter the values of the Time-based LCR you prepared on the sheet of paper in the appropriate fields.
• Click Submit.
Configuring Number-based LCR
• You can configure Number-based LCR for as many as 99 different Numbers, which are stored against
Index numbers from 01 to 99.
• On a sheet of paper, make a table for Number-based LCR.
• Enter each of the number strings at an Index number from 01 to 99. A Number string may be a complete
telephone number, a truncated phone number or an area code. The number can be a maximum of 64
characters (Digits + Wildcards). Valid characters: 0 to 9, *, #, X, T, Comma [,], Hyphen [-], Caret [^ ]. See
“Wildcard Characters” to know the various number patterns you can use.
• For each number string you enter, select a Trunk as your first preference, that is, Preference 1. Select the
trunk of your second, third and fourth preference. When the trunk you selected as first preference is busy,
the system will route the call through the next trunk you have set that is free.
• Refer to the table you prepared for assigning Cost Factor to trunks.
For example, you want all numbers starting with the number '9', which is prefixed with a '0' when making
long distance calls, so enter '9' and '09' as the number strings. For '9' as well as '09', select the SIP trunks
through which the calls should be made in order of preference.
To Next Page
Loading...